How To Install an Underground Dog Fence

As long as you are concerned about the security and safety of your pet, it is necessary to have some boundaries on all sides. Well, we don’t mean a physical boundary to be exact. There are other ways to make and maintain boundaries for keeping your dog safer. An underground dog fence is one of the best solutions on the market.

With this technology, you do not have to worry about bulging fences or anything. At the same time, your pet would stay away from potential threats and harms. That having said, some people think that it’s like rocket science to install an underground dog fence. To be frank, it isn’t.

Well, let’s modify that: it is very easy to set up an underground dog fence if you follow the right instructions. In this article, we have some of the easiest ways to install such a virtual fence. To make things easy, we have made the whole process into just a few steps.

Step #1 Unpack your Dog Fence System

When you purchase an invisible dog fence, you would actually get a packaged product. It actually consists of three major components and their accessories. First, there is the transmitter that will be transmitting radio signals with the dog collar. Second, there is the dog collar with the sensor, which will be attached to the pet. Third, there is the underground wire that would be connected to the transmitter.

Along with these, you will find the basic accessories like power adaptor and the boundary flags. The boundary flags will be useful for an instance, by the way. Depending on the brand of dog fence that you have purchased, there may be some other accessories as well. Now that you have unpacked all these things, you can get ready with next steps.

Step #2 – Set Up the Transmitter, at the Optimal Position

As we said earlier, the transmitter is perhaps the most important component of the dog fence system. This has to be set up in the right manner, at the right place. In case you didn’t notice, the transmitter would constantly be communicating with the dog collar. At the same time, it would be connected to the dog-fence wire also.

So, the transmitter should be placed at an optimal place that has somewhat equal distance to the boundary area. Otherwise, there would be a mishap with the connection. Once you have fixed the right spot, you can set up the transmitter and deal with the power supply. The transmitter needs to be connected to the power supply all the time.

Also Read: How to Install an Invisible Dog Fence in five quick steps

Step #3 – Placing the Fence Wire

The fence wire is what defines the boundary area and the allowed area. If the dog goes past the fence wire, there will be a beep or static correction to combat the behavior. So, you should consider space as quite an important resource. That is, there should be enough space for your dog to play and do things. However, the boundary should not have a conflict with the pavement or others’ spaces.

In order to get the right idea, you’d be able to draw a simple map and mark where you want the wires to go. Once you have set that up in your mind, you can go ahead and place the wires. It’s advised to dig a few inches deeper and keep the cables as underground as possible. Once this is done, you should actually test whether the wire is working, but later.

Step #4 – Set Up the Dog Collar

Now, the dog collar Is the thing to set up effectively. Since this is something the dog is going to wear all the time, you can take time for this. The collar should not be annoying the dog. It should be connected to the actual dog collar if you are already making the dog wear one. Once this is done, you give the dog enough time to get used to the thing. We would recommend putting the batteries in and running the device after the dog has gotten used to the thing.

If you turn on the thing too early, there may be some troubles in the long run. As we said earlier, you can also test whether the collar is working before you put it on the dog. To do this, just put the battery, cross the boundary wire and see if the beep/static correction is working.

Step #5 – Turn Everything On and Keep Training

This is perhaps the most time-consuming part of how you install an underground dog fence. Before you take it to the daily run, you should see everything is working so fine. Connect everything such as the transmitter, cables and the batteries in the dog collar. Once everything is up and running, there should be some testing phases as well.

If you think everything is working, you can start the training as soon as possible. Of course, it is possible to get a head-start if you have a trained dog. In another scenario, make sure you provide enough introductory time instead of running too fast. Once the pet has understood all the basic boundaries, you can try enabling static correction and other reinforcement techniques.
The Bottom Line
This is basically how you install an underground dog fence! There will be differences based on the brand of dog fence you have bought. Like, there may be some options for customizing the dog collar or setting up the boundary spaces. If you do all these things right, managing your virtual dog fence would be easier than you thought it would be.

Leave a Comment