How to Train Your Dog on the In-Ground Radio Fence

There are a few ways to make sure that your dog doesn’t cross boundaries. Of course, you don’t want your pet to cause annoyance by getting into others’ homes, right? But, not everyone can have an actual fence at your compound boundaries. That is why most people go for in-ground radio dog fences, also popular as the invisible dog fence. These are great. You are not constraining yourself but just the dog. That having said, it’s posing a big problem — training.

It’s somewhat tough to train your dog on the in-ground radio fence. It’s not impossible though. But, you got to spend a lot of time and have so much patience for that to happen. And, it’s a great help if you follow some specific steps. In this article, we have a brief how-to guide on training your dog for the in-ground radio fence. Let’s start with some things you should have done before starting.

Things to Do Before Starting

We believe you have already set up the in-ground radio fence. It means that nothing much should be visible to you or the dog, except for the transmitter. However, here is something you might have missed during the process. Let’s make those things right.

  • Make sure that you have placed the boundary flags accordingly. If you had brought one of those best invisible dog fences, you can find the flags in the package. Now that the fence has been set up, mark the fence using these flags. It will help your dog understand the boundaries during the first days.
  • You should have proper control over the level of correction set by the dog collar. Most of the collars have different settings for correction. Some of them start with a warning beep and move up to static correction. Of course, things should be flexible.
  • Training your dog is a long-term process, taking up to weeks or months. It would take more time if you are training a puppy. In any case, you should have so much patience before attempting to do this thing.

If you think these things are all set, you can get started with the training part.

Phase One – Basic Training

This is the first part of the training system, where you don’t put much pressure on your pet. The point is to make the pet familiar with the fencing system. Here are some things to note.

  • You are going to use the beep tone as the training trigger. It’s recommended that you should not be using static correction at this stage.
  • You have to perform multiple training sessions, each with a duration of 10 to 15 minutes. This is way better than long-duration sessions

Now that you’ve done those, let’s get to the steps.

  1. You should have your dog on the leash and walk towards the boundary area, where you have placed the flags.
  2. When the dog reaches the Boundary Zone, the dog collar would start beeping. After letting the dog stay in the boundary zone for a few seconds, you have to bring him/her back to the pet area
  3. Once your dog is back in the pet area, you can provide some treats as reinforcement
  4. You have to repeat the same action until the pet shows a resistance when it comes to crossing zone of the boundary.

If you’ve done these, you’re good with the first phase. You can follow these steps for a few days.

Phase Two – Static Correction

If your dog has become familiar with the beep-based training, you can introduce static correction.

Depending on the dog fence system you have bought, you can change the settings. If there are certain levels of static correction, you should start with the basic level.

Now, you can repeat all the steps we’ve done in the Phase One. Make sure that you treat the dog when it’s come back to the pet area. Without this reinforcement, this training module would not work.

By the way, you should keep attention on your pet, as to whether you’re stressing her out completely. Watch out for common stress signs first.

Phase Three – Put Some Distractions

Even when a dog has learned the boundaries, distractions can make things worse for the owners. So, your pet should be trained to stay away from distractions. Otherwise, a person standing across the road or a piece of food on the pavement would make her/him cross the boundaries, despite the static correction feature.

Let’s get to the steps.

  1. This step requires at least two people, as you know. One should be inside the pet area, holding the leash and the other one should be outside the boundary area.
  2. The person outside the boundary area should have some distractions, like a ball or food.
  3. Now, let the leash go loose and see if the dog is moving towards the distraction, be it anything.
  4. If your dog seems to understand the boundary, praise the behavior and offer some treat.
  5. Even if the dog goes outside and comes back on its own — due to the static correction or not —, you have to offer some treats.
  6. You can repeat the same steps for some time

As we said earlier, it’s always better to do short-time sessions more frequently. This should prevent your pet from being more stressed out as well. Once this thing is done, you can get to the next phase.

Phase Four – Get Rid of the Leash

If you noticed, we were using a leash for all the previous steps. Now, we are going to get rid of the leash.

In this mode, you should leave the pet free, but you have to be in the yard. You should also have some partial attention towards the dog. Otherwise, things may go bad. This is the thing: you should do everything from playing and other work, but everything inside the pet area.

If your pet tries to go out of the pet area, static correction should do its job. If the dog is ignoring the static correction, you can take the right action. With this step, your pet should understand that it should not cross the Boundary Zone even when unleashed.

In the next step of the phase, you can put some distractions across the boundary line. Continue the process until your dog gets used to this.

Phase Five – Keeping an Eye

The last step in the list, you have to keep an eye on your dog almost all the time. You can even use a security camera for this purpose. If all the previous training phases went well, you would not have much trouble, to begin with.

Regarding the removal of flags: It’s not advised to remove the boundary flags on day one. You should wait until your dog gets the idea of the boundaries first. Once the boundaries have been registered in your pet’s mind, you’re good to go.

Summing Up

This should be your ultimate guide on how to train your dog on the in-ground radio fence and the invisible dog fence as a whole. Of course, you should have made sure that you got one of the best invisible dog fences from the market. The better device you get; you should have further customization options. At the end of the day, make sure that you get things done and spend enough time and patience on training.

Leave a Comment